Step 2 – Set keypad options (For LCD Keypads) The keypad will automatically exit the keypad programming after this You will now enter the partition you want the keypad to be assigned to.The Instant LED will illuminate steady and the Service LED will remain flashing The Service LED and the Instant LED will flash on the keypad that you are working on Step 1 – Assign keypad number and partition You will then be asked to enter location.Total Connect 2.0 Package Monitoring Add-Ons.Central Station Alarm Monitoring Services.I could see perhaps having mis-wired something, but to have mis-wired all the sensors on the first expander one way (such that they always show open) and mis-wired all the sensors on the second expander in a different way (such that they always show closed) is beyond credibility. I was expecting to get an error on those zones until I connected the sensor, but that one shows open and one shows closed has me completely befuddled. Literally - I have a length of bare wire run from each zone to where the sensor will be, but the wires aren't terminated. The REALLY odd thing is that on the second expander, zone 23 shows closed and zone 24 shows open - but both of those zones have nothing on them. None of them seem to respond to changes in the sensor status. All the zones on the first expander are showing open, and all the zones on the second expander, except for two, are showing closed. Unfortunately, the system doesn't appear to be reading the expanders properly.

I just added two zone expanders to my DSC PC1832 system, and programmed the zones (in sections 001 and 002) as type 26 - 24 hour non alarm for testing.

Ge networx nx 148e zone lost fix